What a shame, I really liked this pen, was working on the nib because it seemed crooked and misaligned…
Can I fix the feed or find a replacement one or is this thing dead?
What a shame, I really liked this pen, was working on the nib because it seemed crooked and misaligned…
Can I fix the feed or find a replacement one or is this thing dead?
Those are probably commodity components. A surprising number of pens are made out of them. If you figure out what kind of cartridge that takes and what the diameter and length are you can probably buy a replacement feed from any of the myriad pen places on the internet. You should be able to push the busted remainder of the feed to the rear out of the grip section. These are usually just a friction fit along with the nib.
Just to throw an example out there, assuming that is a #6 (i.e. 6mm) nib, which is probably the most common size, here are some random Jinhao replacement #6 feeds.
Edit to add: Gluing it back together is unlikely to work very well. It’d be difficult to keep the ink channel straight, unblocked, and not leaky. The passages in these for ink are quite small and rely on capillary action to work properly, and that’s easy to disrupt.
Do they make new feeds for vintage pens 😅
For the really big name popular ones, probably if you look hard enough. Even so, you may be able to bodge something in that’s close enough to work.
Despite outward appearances, fountain pens are pretty mechanically crude. If you can get the feed to go in the hole and press against the underside of the nib, plus have its length maintain the ability to fit your cartridge in the body, and not fall out in the process you’re good to go. It might not look like original anymore, but at least it ought to work.