• Klystron
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    27
    ·
    1 year ago

    I never liked this new magsafe. When I had an iPhone, I bought a case with one (dumb gimmick that does nothing because the case is adhered to the phone) and a magsafe wireless charger. But every morning I had to hold down my wireless charger to take my phone off of it, or else it would come with the phone when I picked it up. Never made sense from a consumer standpoint for me.

    • bdonvr@thelemmy.club
      link
      fedilink
      English
      arrow-up
      13
      ·
      1 year ago

      I used to have a magsafe charger stuck to the wall and would just stick my phone to it

      • Klystron
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        1 year ago

        Obviously, but what, you’re just using double sided tape everywhere you have a charger? That’s not very apple.

        • anonymous_bot@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          For the standalone magsafe adapters it can be a small annoyance but you can also get charging stands or stations that would be heavier and not have the same issue. Also I would much rather deal with the magnets when disconnecting the phone than not have them and deal with getting the alignment right. I have so often thought my phone was wirelessly charging only to wake up to a dead phone.

          • Klystron
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            On the nightstand, at the work desk, at the home office, near the coffee table, in the kitchen… all pretty reasonable and I’m sure you can think of more. Idk what the solution is but you have to admit the current set up is dumb. Yes it’s a trivial inconvenience but that’s what apple is known for solving…

            • Quatity_Control@lemm.ee
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I find it hard to believe there is a real need for a wireless charger in the kitchen. The whole point of increasing the efficiency of wireless charging is to reduce the time and number of times wireless charging is used.

              • Klystron
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                You’ve never used your phone as a cookbook? Sure there’s not a “real need” for it but if my phone’s gonna sit on the counter for an hour while I make some bouillabaisse may as well charge it.

                • Quatity_Control@lemm.ee
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  Sure. I check a step then do it. Then wake my phone up and do the next step. It’s not like I have the screen on the whole time. And if I did, it’s one hour. That’s not my whole battery.

                  But if you are a true apple user, you’d be watching the recipe on your ipad not your iPhone.

        • weew@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          this is the company that invented a mouse you have to flip over to recharge…

    • danielbln@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      1
      ·
      1 year ago

      Mobile induction charging battery packs, I use one every single day and the only way those make sense is with magsafe.

      • Klystron
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        2
        ·
        1 year ago

        Yeah that’s cool but again I had one for my iPhone and it was awful… I would get like half of the power from it and would make my phone get super hot. You could always use those cases that have a battery built into it.

    • Darorad@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      4
      ·
      1 year ago

      Like the only situation that makes sense to me would be cars, but they all have built in phone supporting screens

      • dingus@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        1 year ago

        I mean, newer cars do. But it’s not like a lot of people are out buying a new car every 2 years like they would a phone. My car is from 2015 and has a lot of bells and whistles but still doesn’t have Car Play or Android Auto capabilities. I wouldn’t even consider it to be that old of a vehicle considering how far you can get on a car nowadays.

        • Darorad@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          1 year ago

          Oh yeah, I mean car play and android auto are older than magsafe or qi2, so all cars that would have them built in would just have car play or auto.

          • dingus@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            arrow-down
            1
            ·
            edit-2
            1 year ago

            Huh? You can easily buy a Magsafe phone mount to stick in your car. You can’t conveniently or cheaply replace the head unit of your car to support Android Auto in a quality way. I mean you definitely can replace the head unit, but it’ll either be expensive as fuck or it’ll be a cheap and shitty experience. And replacing it is nowhere near as simple as just attaching a phone mount to your car.