Too many unknowns to give you any good advice. You need to give info about your system and usage.

• What CPU are you currently using?
• What resolution and refresh rate are you using?
• What types of games are you playing?

I can say- in general there is no such thing as CPU being ‘too powerful’ for a GPU (you can over spend based on your budget though). And there is no difference between 13th and 14th gen performance so buy 13th gen if it is better price.

Try to shift the word “bottleneck” more to the back of your thoughts. It’s not that necessary as you maybe think. Especially not in this case. Here the GPU is more likely to “bottleneck” the CPU but I would say think about it if you have a 1660… . Does not make any difference if you take the 13 or 14 here… go with the one you want to.

Honestly, most haven’t said the way it is, the 14600k and its variants is a 13600k with an overclock, that’s all it is.

In your scenario, where you live, the 13600k costs more because it has the iGPU, which the 14600kf doesn’t.

As for gaming and bottlenecking, you can literally pair a 13600k with a 4090 and have minimal bottleneck when compared to a 13900k.

People still think of these as just i5’s but anyone who has one, will tell you they are way more powerful than what most have traditionally known as an i5.

No matter which way you look at it, there is always a bottleneck one way or another, there’s nothing you can do about that. But what you can do is try your best to ensure you’re more bottlenecked by the GPU, than you are CPU.

In the case of a 13600k/14600k/KF and a 3070 all the way up to about a 4070ti-4080, you will be GPU bottlenecked. So choose whichever suites your budget, either way you’re going to have one hell of a powerful CPU, just decide whether you want/need the iGPU or not.

I personally see the value in the iGPU myself, for that small bit extra in cost, it gives me piece of mind, knowing that if something happens to my GPU, I can still use the iGPU to have a display and troubleshoot, or at least still use the pc while the GPU is getting repaired or replaced.

If you have 99% GPU usage, I’d never call that a bottleneck. That is the best scenario you can have.

However, if you got less than 90% GPU usage, then that is the thing I would call “bottleneck”.

There will always be some sort of bottleneck in your system, so don’t worry much about it.

A 10600k is not “bottlenecking” a 3070 in many cases. But it all depends on the scenario.

but im scared that the 14th gen will be too powerfull

choosing powerful cpu mostly useful , if you need that for your purpose…

(very lower cpu + higher end gpu will create most of the bottleneck issues)

and 13600k (k version) have igpu, so add some value for it then compare price (14600kf and 13600k performance are almost similar, i think)