I got a DVD, never used with cellophane intact, produced in 1993 on ebay. I thought maybe, since I didn’t get a DRM warning, it predated DRM, and I could just copy it to my hard drive, so I did. Both the copy and the DVD are now corrupted and unplayable. I want to fix the DVD then rip it to my hard drive. Googling gives plenty of suggestions for ripping but none for fixing. Please help if you can. Thanks.

  • ElderWendigo
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    1 year ago

    You’re half right for the wrong reasons. Disc rot just doesn’t happen to stamped original discs, only writable discs rot. Old cheap discs might degrade for other reasons of course (like scratches or labels delaminating and tearing away at a substandard construction), but the data layer of original stamped discs doesn’t decompose because it’s mechanically stamped into the data layer. Original discs would have been stamped foil pressed between two layers of plastic. Cheap discs sometimes just skipped the top layer of plastic so that the data layer was just under the painted label. Writable discs especially using this cost saving technique. Thus any damage to the top label would damage the data layer. Writable discs rot because the bits are burned into a different kind of data layer film that can fade or otherwise decompose, but I doubt you’d be able to actually see dots from rot. Using the wrong kind of pen or using sticker labels could easily damage the data layer. If you hold a disc up to a light source and see dots of light through it, the foil layer has been scratched and it will be unplayable, but this is physical damage not rot.

    • Moonrise2473@feddit.it
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      1 year ago

      I have many original professional made audio CDs from the early 90s that if you listen them, there are a lot of skips. I watch them against a light and I can see many dots. Bought them in 1991, started to have this problem a decade ago. They’re with a gold dye

      For audio CDs I never saw two layers of plastic, only saw that on DVDs. But I stopped buying audio CDs in the late 90s

      • ElderWendigo
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        What do you mean by professional made? The color of any dyes doesn’t really enter into it.

        Mass produced CDs were physically stamped foil laminated with plastics. Writable discs regardless of quality, professional or otherwise, worked on a completely different principle which would fade (or rot) over time. Pretty much every other problem is physical and not rot.

        • Moonrise2473@feddit.it
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Professional made = original and paid very expensive, 15 euro in 1991 which was insane

          I don’t know the terminology but if I listen to it, it skips and if I shine a light through it , I see many small holes