I have a set of 3 Bra Premiere non-stick frying pans that I’ve used for a while. The coating on them says “Teflon Innovations without PFOA”. Recently I’ve noticed that on the most used pan, the 26cm one, the Teflon coating has started to peel off.

I know that Teflon coatings can release harmful fumes and chemicals if overheated, but what about if the coating is physically peeling? Is it still safe to cook with them? Or should I stop using especially the 26cm one? I don’t want to keep exposing my family to anything dangerous unknowingly. Any advice if these types of pans are still safe to cook with if the nonstick surface is peeling would be appreciated!

  • Kusimulkku@lemm.ee
    link
    fedilink
    arrow-up
    6
    arrow-down
    2
    ·
    1 year ago

    non-stick is overrated to begin with

    I’d say it’s correctly rated. It does the no-stick well while not being as durable. In my experience that’s what people expect from it.

    • TrickDacy@lemmy.world
      link
      fedilink
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      I’ve never known anyone in real life who owns Teflon cookware who thinks it’s a concern in any way. If they saw any issue with their 15 year old teflon skillet, it’s that it visually looks bad from all the scratches

      • gravitas_deficiency
        link
        fedilink
        English
        arrow-up
        9
        ·
        edit-2
        1 year ago

        That’s because most people didn’t realize they start shedding microplastics after the coating is damaged and you keep cooking with it until pretty recently.

        • Gormadt@lemmy.blahaj.zone
          link
          fedilink
          arrow-up
          7
          arrow-down
          1
          ·
          1 year ago

          The main issue from Teflon is the manufacture of Teflon

          Making that stuff makes some gnarly byproducts

          The Teflon it’s is relatively safe as long as you keep it under like 220C, if it gets too hot it will start breaking down and releasing some gnarly gas

        • TrickDacy@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          I mean, I never cared to know more, when in 2001 someone told me that I’d be eating chemicals if I used metal utensils with non stick. I never needed or wanted proof that was bad. Other than having to explain this several times, it’s never caused me any issue just to not do it. Using different cookware or a wooden spoon is quite a low effort fix.

          I’ve found that time and again, when I explain this, people almost act like I’m stupid for caring to take this tiny precaution. I’ve always found it really weird to need hard evidence before taking easy precautions which cost little to nothing… Like people who smoked until it was proven to cause cancer. It was pretty fucking obvious to anyone couple years into adulthood and paying attention… that shit was bad for you.

      • Kusimulkku@lemm.ee
        link
        fedilink
        arrow-up
        2
        arrow-down
        1
        ·
        edit-2
        1 year ago

        The one concern is that cheaper ones get ruined real fast, that’s why all cooking groups hate them (but people also keep buying them because cheap and convenient).

        No stick but not durable seems to be the consensus I’ve seen and that’s, yeah that’s what it is.

        • grue@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          The one concern is that cheaper ones get ruined real fast

          Expensive ones get ruined real fast, too. There’s no point in buying expensive teflon cookware; it all wears out at the same rate, so the fancy stuff is just a rip-off.

          • Kusimulkku@lemm.ee
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Oh. I’ve had much better experience with more expensive ones. At least in my use they seem to survive better.

            • icanwatermyplants@reddthat.com
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              I learned that the biggest difference between cheap and expensive non stick pans is basically the amount of non stick coatings. Regardless, the non stick coating will wear off over time. This was the conclusion from a documentary I once watched on whether it was more economical to bit a cheap pan every so often or an expensive pan less often.

              Personally I would strongly recommend cast iron from a reputable brand or carbon steel if you can afford it. Stainless steel also works, but is more tricky to not stick. Cast iron is heavier, but very forgiving and will last you a generation or more.

              • Kusimulkku@lemm.ee
                link
                fedilink
                arrow-up
                1
                ·
                1 year ago

                The non-sticks are usually cheap and require minimal effort. Carbon steel could be a cool alternative though