I am not a tech person, but I cleaned out my secondhand PC today, and it took hours with the sheer amount of dust accumulation. The fans were nearly overloaded with it!!
Does a clean PC run better / faster than one filled with dust? Or is it more a matter of keeping the fans running easily? Or something else…? Idk, maybe I imagined it, but it seemed to boot much faster after cleaning. Could be wishful thinking!
……bucket???
They meant to say hogshead.
Oh, it was bad. Real bad.
Got any, photos? For science.
Yeah, I too am morbidly curious
Looking into my trash, it’s more like half a bucket, the other half being crumpled paper towels.
Sadly, I only remembered to take a single one before the process started. You can see an alarming amount of dust on certain parts if you look closely.
Warning for tech-gore, maybe? Again, I’m not a tech person. The back has always been partially open. This was built by someone else, and it’s… probably not standard.
I would suggest to either remove the expansion slot cover or screw it back properly. As it is, it could probably fall and short something.
I was suspicious of that guy!
It’s been removed.👍Thank you!
Hahahaha YESSS!!! Fuck that cover in particular.
Wow that is… Magnificent! I’m glad you de-dusted it but I’d be more worried about cables becoming disconnected while you’re trying to clean it.
Glad it worked out for you though! Fingers crossed it continues to work🤗
FYI the PSU box with those black shielded power cables is meant to fit internally in the big hole at the top 🤣
I usually use compressed air to clean the dust out of my cases. If you’re feeling adventurous, you could slide that side panel off and attempt to re-home the PSU inside the case.👌🤣
Aye, forget the dust, this whole rig with the PSU hanging out is sketchy af. Also, the barely hanging expansion slot cover, waiting to short something with the slightest bump is also a nice touch.
It’s my kinda computer lol 🤣 Nothing should really short though as long as all the connectors are securely connected.
The PSU is sketch but likely fine. I’m more worried about the expansion slot cover that’s barely hanging.
I have an old pic somewhere of an old Frankenstein PC with the case cut with tin snips to fit a bigger GPU. It also had an external PSU for a while, although I did add a ground wire between the PSU and case. I’ll see if I can find it.
Yeah and I didn’t even notice before but WTH is the ATX plug doing on the outside of the case anyway 🤣
Oh, I labeled the cords & disconnected them to clean. Slid the side off to give everything a thorough shine!
Problem is: this cables connect to this big ho (which I also had to clean very very heavily).