I’ve been really happy with the following lately:

16g:275ml coffee:water, coffee ground on the fine side of medium. Wet paper filter, 205 degrees Fahrenheit water, conventional brew, 10 minute extraction, swirl to settle grounds to bottom of the press, and a gentle plunge.

It’s considerably more work than a prismo recipe, but I think its well worth it

  • @[email protected]
    link
    fedilink
    31 year ago

    I don’t do inverted. I just add coffee and fill up the aeropress with boiling water. Then I put in the plunger to keep the water from dripping. After a minute or so I’ll do one swirl to get the grounds to sink to the bottom. The I way for like five to ten minutes and press slowly.

    I use one filter and usually go for a light roast. I also tried stirring with a spoon but I seem to prefer the swirl

  • @[email protected]
    link
    fedilink
    31 year ago

    10 minutes extraction seems a bit long, no?

    I go for a light roast, 14g with 250ml water (boiling). 2 minutes extraction, swirl, 30 seconds for settling and then the plunger goes down over the course of another 30 seconds.

    • The CuuuuubeOP
      link
      fedilink
      71 year ago

      I. Am. So. EXCITED RIGHT NOW! I get to introduce you to a new thing! The AeroPress is a coffee maker that combines several different brew methods. It was originally designed by aerospace engineer, Alan Adler. Adler is an inventor with many inventions credited to him. His two most famous inventions are the Aerobie flying disc, which holds the record for longest thrown object, and this, the AeroPress coffee brewer.

      The AeroPress was invented out of the desire to have a low waste, easy to use, single cup coffee brewer. According to Adler’s recipes, you can make coffee for four people using one by simulating the bypass that pour over recipes experience by adding hot water once the brew is complete (like an Americano). Most home brewers though, have taken to… Slightly different approaches from Adler’s recommended recipe.

      And there inlies one of the reasons the AeroPress has become very popular worldwide. There’s a littany of different recipes you can use to make a delicious (and rich) cup of coffee. The other reason is that for a long time, the device was less than $30, and came with everything you needed (and more) to brew coffee using it for a full year. Unfortunately, the new company who now owns AeroPress has reduced the amount of accessories that come with the brewer and increased the price by $10, thus making it a much less attractive value proposition. However, I still do think it’s a noteworthy coffee making device because I haven’t found another brewer that makes coffee with quite the taste and mouthfeel that my favorite recipes acheive.

      So… That’s a lot about the history of the AeroPress, except for that I didn’t mention that the prototype version was an elephant syringe, but nothing about how it works. At its base, the brewer blends several coffee making processes into a 4-10 minute window (depending on the recipe you like). First, you put in your coffee grounds and your water, and some of the water will run through the grounds into the cup, much like a traditional drip brewer. In fact, if you omit the plunger from the device, it will slowly drip through the grounds and make a (relatively ungood) cup of coffee.

      Once you insert the plunger, you switch to an immersion brew, much like a French press. It is during this phase that the bulk of the flavor and caffeine extraction will occur. Finally, when you press down on the plunger, you are performing a percolation style brew (think a lower pressure version of a Moka Pot or espresso machine).

      Finally, I think I would be doing you a disservice by not mentioning the community that has grown around this little device. There’s an annual competition called The World AeroPress Championship. It stands in contrast from the World Brewers Cup and The World Barista Competition in that the judging is done purely on “Did your coffee taste good.” Further, there is a litany of third party, aftermarket products available as attachments, integrations, and just general useful gadgetry.

  • @m8725279
    link
    21 year ago

    I have been enjoying V60 Killer with light-medium roasts lately. If you are into experimenting, check out AeroPrecipe, many interesting recipes to try.

    • Gone Quill
      link
      21 year ago

      Also check out AtomicPress if you’re an android user. The developer sought to take the James Hoffman dice and make them… A bit more unreasonably random. Sometimes the random recipes stumble into something truly excellent and unexpexted

        • Gone Quill
          link
          11 year ago

          I was using that one for a while but I really wanted something that was nice on my phone, and the unreasonably random is a major draw