As unfortunate as the naming misdirection is, I have to say: LDAC sounds significantly better (to me) than other Bluetooth codecs I have tried. It also works on Linux and android with no issues whatsoever. Open source is good.
I use it with a pair of Sony XM5’s, which can also be used in wired mode, so you kind of get the best of both worlds.
It’s loss-less, not loss-none
Ignorant of the subject matter, but I ripped a bunch of CDs to FLAC some time ago. Would that not work for this purpose?
The Sound Guys do a good job of breaking down LDAC, however the main point of criticism I have about the article is that they say that LDAC isn’t great because most smartphones don’t auto-choose the highest 990 bitrate. That doesn’t seem like an LDAC problem, that seems like a phone problem. My phone is admittedly a Sony, but it always chooses the highest bitrate first. There’s even a setting to force it to use 990.
The other criticism I have is that the sound guys kind of overlook the fact that, when your phone is in your pocket, it’s close enough to the headphones that you’ll almost always get the 990 bitrate. And the sound quality at 990 is fantastic. I cannot tell a difference between it and a wired connection for CD-quality FLACs. Even the 660 stepdown bitrate of the LDAC codec is really good.
Bluetooth has fairly low bitrate which also helps save power. The throughput will also vary with signal quality. It needs to somehow adjust to worse conditions, otherwise it will just keep cutting out. Streaming CD quality FLAC could probably be done over Bluetooth 5 2M PHY, but 2Mbps is just the physical layer. There’s also some overhead. Perhaps just enough would be left, but the bitrate will also vary with the content. Not everything can be compressed much, while some audio can be compressed quite a bit.
Probably would work, but the reliability is also a question.
Anyway, just guessing. Perhaps the 3Mbps EDR could be used just fine.
Oh, Bluetooth 3.0 + HS could do 24Mbps. Sort of. It used WiFi to do that.
Ldac is a Bluetooth thingy, so my understanding is that flacs will be re-encoded on the fly when you play 'em on bt headphones with ldac.
Audio CDs contain 44.1kHz 16-bit PCM. If you got FLACs out you transcoded them, and transcoding from lossy to lossless is generally undesirable
I’m pretty sure if you rip CDs directly to FLAC, it’s a perfect copy assuming you’re using good software. PCM isn’t lossy or lossless because it’s not a compressed format, it’s an uncompressed bitstream. Think of it like the original data. If it was burned to a CD as digital MP3 data and then ripped that to FLAC, then yes you’d be going from lossy compressed to lossless, which would hide the fact that quality was lost when it went to MP3 in the first place.
Just as an example, you can rip a CD directly to FLAC (you should also find and use the correct sample offset for your CD drive), rip the cue sheet for track alignment, then burn the FLAC back to a new CD using the cuesheet (and the correct write offset configuration), and you’ll get a CD with the exact bit for bit pattern of “pits” burned into the data layer.
You can then rip both CDs to a raw uncompressed wav file (wav is basically just a container for PCM data) and then you’ll be able to MD5sum both wav files and see that they are identical.
This is how I test my FLAC rips to make sure I’m preserving everything. This is also how CD checksum databases (like CDDB) work - people across the globe can rip to wav or flac and because it’s the same master of the CD, they’ll get identical checksums, and even after converting the PCM/wav into a flac you are still able to checksum and verify it’s identical bit for bit.
But CDs are lossless to start? Raw PCM is raw digital audio data, it’s completely uncompressed lossless audio so transcoding to flac is the most sensible thing to do. The flac will just be transcoded back to raw PCM for output anyway, as raw PCM is what audio hardware accepts for playback.
100% right.
PCM Wav is uncompressed (best quality) and FLAC is lossless compression. FLAC will keep the audio quality while significantly reducing size of the file so ripping a CD to FLAC is a good idea.
I have had a few (I think only 2) CDs that actually included a few different formats in the filesystem, otoh ogg, flac, MP3, and wav. That was a nice surprise when I was preparing to rip them.
Konqueror, IIRC, will show you “virtual” MP3s & FLACs, complete with file sizes and all, when you put in an audio CD. You can copy these files to your hard disk. They are created on the fly, though.
Does this meme format / cat have a name? I was trying to find the raw version the other day and could not.
“Cat looks inside”
Thanks!
My favorite is most people are listening to already lossy compressed music that gets decoded and then recompressed in another lossy manner… I miss my cable sometimes.
In the end, I found I don’t really care that much, since lossy Bluetooth works well enough for earbuds on the go, and good old cables are still available for more serious listening.
Plus, the truth is that most people can’t tell the difference between lossy and lossless without doing A/B testing, and some can’t tell even with that
We really need someone other than Qualcomm & Apple to come up with lossless Bluetooth audio codecs.
TBF the whole Bluetooth audio situation is a complete mess
Bluetooth as a whole is kind of a mess if we’re being honest.
Comes from being a compromise “standard”. The name says it all, being named after a king that brought multiple tribes together.
Well bluetooth doesn’t carry enough bitrate to accomplish this. Besides. Apple won’t and doesn’t need to because their AAC encoder is superior. There is no other bluetooth codec that comes even close. Every codec that claims to be the best one yet is more marketing than anything.
Vendors reframed the narrative for SBC to be dog shit so they can push their own as cutting edge new tech. In reality SBC isn’t that bad. The vendor codecs aren’t that good. And Apple has some kind of secret sauce in their AAC encoder that results in really good quality reproduction of audio.
As far as I’ve seen most of the gimmicky codecs are spins of existing old technology. AAC itself is old too but at least one vendor Apple has focused on making their implementation good. We don’t need another standard+1. We just need a common standard done well. If only Apple would open theirs.
Opus! It’s a merge of a codec designed for speech (from Skype!) with one designed for high quality audio by Xiph (same people who made OGG/Vorbis).
Although it needs some more work on latency, it prefers to work on bigger frames but default than Bluetooth packets likes, but I’ve seen there’s work on standardizing a version that fits Bluetooth. Google even has it implemented now on Pixel devices.
Fully free codec!
opus isn’t lossless
Ah yes, good old TS3 and Mumble times.
discord also uses opus
is opus the one that allows high quality mic and headphone at the same time over Bluetooth?
Sony created LDAC
Isn’t LDAC made by sony?
Correct. Qualcomm makes aptX
Wait, did Apple implement its own codec? I thought even the Airpods Max used AAC, which is lossy.
As for Qualcomm, only aptX Lossless is lossless and I’m not aware of many products supporting it (most supports aptX HD at most)
The newer H2 SoC AirPods support ALAC, Apple’s lossless codec; however, their phones don’t yet support it, so the only way to use it is with the Vision Pro.
AFAIK, ALAC will not be actually lossless over bluetooth for the sames reason LDAC can’t be lossless; there simply isn’t enough bandwidth. That doesn’t mean that it won’t sound great or perhaps work better than LDAC.
It runs over a 5GHz connection, not a 2.4GHz connection like bluetooth.
Oh, so they aren’t on bluetooth at all? That is an entirely different story, thanks for the info.
Wait what? Do they not connect over bluetooth? Please don’t tell me they made up more proprietary bullshit.
Yes, the protocol used is currently proprietary. That being said, so was ALAC at launch and they later made it open-sourced and royalty free.
Yeah, the problem (imo) isn’t lossy v lossless. It’s that the supported codecs are part of the Bluetooth standard and they were developed in like the 90s.
There are far better codecs out there and we can’t use them without incompatible extensions on Bluetooth.
There’s a push for Opus now, it’s the perfect codec for Bluetooth because it’s a singular codec that fits the whole spectrum from low bandwidth speech to high quality audio, and it’s fully free
Opus is great, but there is no option to make it lossless, like what WavPack (also a free-as-in-freedom codec) provides for example.
Just use uncompressed 16bit/48khz! We’re not bats that would need 96khz audio!
Ah, misleading use of terminology that indicates one thing, but will win in court even if it actually means, or can later be said to mean, another.
I hope those involved in helping companies win these lawsuits choke on bones from food sold as boneless. Because that won a court case after “boneless” was redefined as a cooking method.
I don’t want them to choke to death. Just a little lesson, you know?
I remember when unlimited minutes plans for cell phones meant 300 minutes.
Or when Comcast had unlimited downloads which was capped at 2 TB.
These shitty companies know exactly what they are doing.
I had an “unlimited” plan with a cell company - I took them at their word and downloaded gobs of stuff. Got shut down in a week.
I work in pro AV and so many companies do this. Wow, you say LOSSLESS video on a valens chip? Oh, you’ve never actually done a side-by-side conparison, have you…
Extron differentiates between lossless and “visually lossless” which I appreciate.
Transparent or indistinguishable lossy compression are other common terms
I’m perfectly OK with those, too.
I vote they choke indefinitely. But not to death; I want them to die of old age, spending decade upon decade choking endlessly.
Just a little to death.
Of course it’s Ohio!
To my knowledge it’s lossless in CD quality only, in high-res modes it becomes lossy
FLAC is a lossless compression format. It will reduce file size but keeps the audio quality. So-called “high-res” format on streaming platform like spotify (mandatory fuck spotify here) are usually mp3 320kbps so heavily compressed and lossy, indeed.
I don’t understand what’s funny. It’s developed with no competition, it’s open source, it’s definitely better than the current options out there and doesn’t cost money. Is it just audio snobs in here? I consider myself somewhat snobby re:audio but even I use wireless headphones. Some grade A snobbery in this thread. LDAC is great. You’re not convincing anyone to go back to wired headphones for day to day use
it’s as simple as
loss-less vs. lossy
within only a few words of the main description of the thing - no judgement on the tech whatsoever (at least from my side)
“On 17 September 2019, the Japan Audio Society (JAS) certified LDAC with their Hi-Res Audio Wireless certification.”
Something something oxymoron. Bluetooth is trash, its why I still use wired whenever I can.
